Artificial Intelligence SystemsEvent Previews & RecapsIoTMobilitySponsored Content

Why you need Smart or Managed Automotive Ethernet Switch?

This sponsored post, associated with the IEEE Standards Association (IEEE SA) Ethernet & IP @ Automotive Technology Day event, solely represents the views of the author, was developed independently by the entity sponsoring the post, and does not necessarily represent a position of either IEEE or IEEE SA.

Switches are Open Systems Interconnection (OSI) model Layer 2 devices that are responsible for forwarding frames addressed to other ports by using addresses in the layer 2 header (MAC addresses). The most common switch in the market is the unmanaged switch. These require little or no configuration as they learn where to forward traffic by building a table based on the traffic entering the switch. Unmanaged switches are not only a security risk in automotive, they lack features necessary in today’s evolving automotive architectures.

Intrepid RAD Pluto SwitchRAD-Pluto is Intrepid’s new 5-Port Smart Switch based on NXP SJA1105. Having IEEE 802.1Q™ tag support it can logically separate the network into multiple virtual LAN’s (VLAN) on a single device. Other features of the switch enable many other applications such as a media converter — creating an exclusive connection between two ports and block traffic from all other ports, port mirroring — monitor the traffic on specific ports, gateway functions — enabled by scripting to route messages from one network to another, and modify the contents of the frame as it passes through. Frame mirroring and VLAN tagging for advanced debug and monitoring.

The RAD-Pluto has 3x100BASE-T1 ports, 1x port that can be configurable between 100BASE-T1 or 1000BASE-T, and 1x port switchable between a USB3 GigE bridge or a port connected directly to a scripting processor. The rugged package also integrates 2xCAN FD channel and 1xLIN channel to interface with the rest of the vehicle. All of these network interfaces are combined with an embedded processor to execute real-time function block scripts and C code applications.

Smart or Managed Automotive Ethernet Switch

Some automotive applications required the additional capability of a managed switch. This switch adds a host processor or embedded core to allow the switch to support advanced functions and protocols. A managed switch may support dynamic VLAN management (MVRP), managing redundant paths, audio video bridging (AVB)/time sensitive networking (TSN) protocols, deep packet Inspection, and ingress policing and limiting. Intrepid’s RAD-Jupiter is a ruggedized 7-port managed switch based on the Marvell 88Q5050 designed specifically for bench and vehicle network development.

Smart or Managed Automotive Ethernet Switch

The RAD-Jupiter has 5x100BASE-T1 ports, 1x switchable 1000BASE-T or 1000BASE-T1 port, and 1x 1000BASE-T or USB GigE Bridge. In addition, it contains a scripting processor connected to the switch having 2xCAN FD channels with programmable termination and 1xLIN channel to interface with the rest of the vehicle. 

Intrepid is a Diamond Sponsor and Platinum Exhibitor at the 2019 IEEE Ethernet & IP @ Automotive Technology Day this 24-25 September in Detroit, MI. Come to Intrepid’s booths A11 & A20 to see the RAD-Pluto and RAD-Jupiter in action!

Show More

Related Articles

One Comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button